Ager Stone Enhancing Sealer

Tenax Ager is a premium stone enhancer and sealer designed to revitalize and enhance the natural color and grain of stone surfaces. It protects stone pores from absorbing potentially discoloring liquids, giving a deep, rich appearance while helping to guard against graffiti. Ager is a solvent-based product suitable for a wide range of natural stone surfaces, including:

Marble, Granite, Limestone, Sandstone, Quartzite, Travertine, Agglomerate, Rosso Verona.

Important Warning

Tenax Ager does not provide anti-etch protection on marble. Acidic substances such as wine, tomatoes, citrus, and coffee can etch marble by reacting with calcium carbonate. For etching problems, use Tenax TeEtch.

• Resistant to UV rays
• Does not yellow over time
• Resists water-based stains
• Resists oil-based stains
• Enhances the natural color and grain of stone
• Provides added protection against graffiti

1. Ensure the stone surface is clean and completely dry.
2. Apply Tenax Ager undiluted using a paintbrush, cloth, fleece, or sponge applicator.
3. Allow the stone to naturally absorb the sealer evenly.
4. Within a few seconds, wipe off any excess with a clean cloth or sponge to avoid sticky or glossy residue.
5. Avoid applying in direct sunlight.
6. Wait 24 hours for the surface to cure completely.
7. For stone surfaces exposed to foot traffic, do not walk on the treated area for 4–6 hours after application.

Keep the container tightly closed after use. This product will last at least 12 months under normal conditions (65°–77°F). Store away from heat, humidity, and direct sunlight.