Booster Alk Concentrated Alkaline Degreaser

Booster Alk is a multipurpose tile and hard surface cleanser suitable for a variety of cleaning tasks. It can be used full-strength as a stain remover on specific materials or diluted for general cleaning. Booster Alk is effective at removing stubborn discolorations, including:

Organic dirt, Rubber marks, Waxes, Epoxy residue.

When diluted appropriately, Booster Alk can clean tough dirt and grime from a variety of surfaces, such as:

Ceramic, Porcelain, Unpolished stone, Glazed ceramic, Cement, PVC, Granite, Unpolished marble, Non-glossy cement agglomerates.

Key Features

• Compatible with many materials
• Removes rubber marks
• Great for tile and hard surface cleaning
• Concentrated for dilution to desired strength
• Removes stubborn dirt effectively
• High-powered cleaning action

Instructions

As a general tile cleaner:

• Mix 1 part Booster with 20 parts water (standard ratio)
• Apply the mixture to the surface to be cleaned
• Leave for 5–10 minutes
• Work with a brush while wearing hand protection
• Rinse thoroughly to remove all residue

For porcelain stoneware stain removal:

• Apply undiluted Booster with a small brush or paint brush
• Allow to sit for approximately 10 minutes
• Scrub the area using a scrub brush
• Rinse thoroughly with water
• For stubborn stains or epoxy residues, cover with plastic and leave for several hours

Mixing Ratios for Tougher Cleaning

• 1:20 = Standard ratio (recommended)
• 1:10 = Tougher dirt ratio
• 1:5 = Stubborn dirt ratio

Shelf Life and Safety

The product will last at least 12 months when stored under normal conditions, away from heat, humidity, and direct sunlight. Close the container after use.

Safety precautions:

• Keep out of reach of children
• Avoid contact with eyes and skin
• Do not mix with other substances
• Do not use on waxed or glossy surfaces
• Always read the Safety Data Sheet (SDS) and product instructions before use