Mastidek Cartridge Glue

Mastidek Cartridge Glue for Cosentino Dekton is a next-generation bi-component adhesive specifically formulated for bonding Dekton surfaces. Designed for professional fabrication and installation, Mastidek delivers very high adhesion with fast curing performance, allowing assembled pieces to be cut and polished in approximately 45–60 minutes.

Once cured, the adhesive achieves a high-gloss finish and excellent polishability, making it ideal for visible seams and precision work.

This product is supplied in a 215 ml 2:1 ratio bi-axial cartridge. The resin and hardener are pre-dosed within the cartridge to ensure precise mixing and eliminate application errors. When used with the proper 2:1 cartridge gun and static mixing nozzle, the adhesive extrudes and mixes automatically for consistent results.

Requires use of a 2:1 Cartridge Gun for Mastidek.

Key Features

• Very high adhesion on Dekton surfaces
• Fast curing (cut and polish in 45–60 minutes)
• High gloss after cutting and polishing
• Suitable for outdoor use
• Cures at low temperatures (as low as +1°C / 33.8°F)
• Pre-dosed cartridge eliminates mixing errors
• Ready to use

Directions for Use

• Ensure all surfaces are clean, dry, and free of dust and grease.
• For polished or glossy surfaces, lightly sand before applying adhesive.
• Remove cap and attach the threaded static mixing nozzle.
• Dispense approximately 6 inches of product before application to ensure proper mixing.
• Apply adhesive to surface and assemble components.
• After use, remove and discard the mixing nozzle, clean the cartridge tip, and replace the cap.

Note: Product will not set below 32°F (0°C).

Shelf Life

Unopened cartridges have a shelf life of at least 12 months when stored between 65°F and 77°F. Keep away from sunlight, heat, and humidity.

Safety

Please read the Safety Data Sheet (SDS) before use and follow all product instructions carefully.